Antiscalant Particles
- Product Item : OZAP-010
- Category： Antiscalant Media
- 20g ZONE antiscalant particles treat for over 20000Liter water
Shower shower/bulk or composite carbon rods
01. Product Features
High efficient:20G anti-scale particles can treat more than 20 tons of water with ahardness of 350PPM,and the anti-scale effect reaches 95%.
Safety:Does not contain any adhesives such as glue
High temperature resistance:Under the high temperature condition of 600 C, it can still maintaina stable anti-scaling effect.
Material stability:lt does not affect the COD content of the water body, and the CODdissolution amount is 0.
02.Scale formation
The formation of scale usually starts from the formation of tiny crystals. Thecrystals are precipitated from the supersaturated solution. There are twostages of nucleation and lattice growth, and each stage is divided into threegrowth stages, namely the initial stage, the middle stage, the end periodgraduallv form alattice after thesehatis tosavthe crvstalnucleusthree growth periods. The growth of the crystal lattice is a slow process. Onlyin some activated regions of the crystal nucleus, the crystal lattice can growby adsorbing and precipitated ions After three growth periods, crystals aregradually formed, that is, scale.
03.Product experiment
Test Conditions:After passing 20 tons of water, the scale inhibition effect after boiling at a flow rate of 1.6L/min
04.Phosphorus-free scale inhibitor
Experiment/ONE
The scaling phenomenon of water is obvious, and the floating objects increaseobviously. The bottom is accompanied by sediment.
There is no scaling in the water, no floating objects, and no sediment at thebottom
Experiment/TWO
There is phosphate scale/scale pluggingThe in the outlet The water outlet of the shower is free of scale and the
hole of the shower, which affects the use of the product water is smooth
05.cale inhibitor series Test Report
