Home Products Antiscalant Media Antiscalant Balls Antiscaling Beads
Anti-scaling ball
01.Scale formation
The formation of scale usually starts from the formation of tiny crystals. Thecrystals are precipitated from the supersaturated solution. There are twostages of nucleation and lattice growth, and each stage is divided into threegrowth stages, namely the initial stage, the middle stage, the end period.That is to say, the crystal nucleus can gradually form a lattice after thesethree growth periods. The growth of the crystal lattice is a slow process. Only in some activated regions of the crystal nucleus, the crystal lattice can growby adsorbing and precipitated ions After three growth periods, crystals aregradually formed, that is, scale
02.Performance data
The test data is obtained by the test prototype, and the test prototypeconfiguration;
Total net water
Flow rate(L/min)
Water pressure(Mpa)
h740Lness
Scaling phenomenon
Scaling phenomenon
200L
2.4
0.26
574
Severe Float +Precipitation
None
1000L
2.2
0.20
574
Severe Float +Precipitation
None
2000L
2.2
0.24
574
Severe Float +Precipitation
None
3000L
1.8
0.18
559
Severe Float +Precipitation
None
4000L
2.0
0.30
574
Severe Float +Precipitation
None
5000L
2.2
0.26
574
Severe Float +Precipitation
None
6000L
2.2
0.20
574
Severe Float +Precipitation
Light float
7000L
2.2
0.20
574
Severe Float +Precipitation
Light float
8000L
2.0
0.30
574
Severe Float +Precipitation
Light float
9000L
2.0
0.26
574
Severe Float +Precipitation
Light float
10000L
1.8
0.20
574
Severe Float +Precipitation
Light float
03.Phosphorus-free scale inhibitor
Experiment/ONE
The scaling phenomenon of water is obvious, and the floating objects increaseobviously. The bottom is accompanied by sediment.
There is no scaling in the water, no floating objects, and no sediment at thebottom
Experiment/TWO
There is phosphate scale/scale pluggingThe in the outlet The water outlet of the shower is free of scale and the
hole of the shower, which affects the use of the product water is smooth
06. Scale inhibitor series test report